Victor Data Systems XID Manual de instrucciones Pagina 32
- Pagina / 48
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
32
Setting the bend remedy mode
Single-sided printing may cause a bend depending on
the cards. Adjust the setting to get rid of the bend.
CAUTION
>Bend Remedy>
>>Temp Level
>>Speed
>>Cooling Time
off
-2
-2
ENTER
ENTER
MENU
MENU
MENU
EXIT
EXIT
EXIT
ENTER
EXIT
RESET
ENTER
ENTER
Exit user
mode
Set the bend remedy roller temperature
There are 9 bend remedy roller temperature settings:
(off and from –5 to +2 the larger the value the higher the temperature).
Press to select the setting and press to save.
(The electronic beep sounds.)
*After exiting the user mode, press and then press to initialize.
If initialization is not carried out, the temperature setting will have no effect on the printer.
Bend remedy speed settings
5 gradations can be set
(from –2 to +2, the larger the value the faster the speed.)
Press to select the setting value and press to save.
Press to select the setting value and press to save.
(The electronic beep sounds.)
(The electronic beep sounds.)
Cooling time setting:
16 gradations can be set
(none and 1-15, unit: seconds).
If the bend remedy temperature
setting is set to off from any other setting, the
preheating status will remain the same until the roller
temperature falls (for approximately 10 minutes).
This is not a malfunction. Leave the unit in ready
status and wait.
Memo
1. Setting temperature and speed of the bend
remedial roller
Adjust the “roller temperature” setting in principle
to correct the bend of the card, and use the
“correction speed” setting for fine adjustments.
2. Setting waiting time for cooling the card
This provides the time for a special film, which
will be marketed in the future, to cool down to
prevent the card and retransfer film from sticking
together after printing.
CAUTION
When printing on both sides is
done with “Remedy roller temperature setting” set to
a high temperature, the cards may show a large
deformation.
Please set this item to OFF for printing on both sides.
- XID Printer 1
- Declaration of Conformity 2
- Contents 4
- Notes for safe operation 5
- (continued) 6
- Before use (continued) 8
- Names of parts 9
- Core (Accessory) 10
- Binder (Accessory) 10
- Connection cable 10
- (Commercially available) 10
- Connecting the IC unit 11
- (sold separately) 11
- Set-up (continued) 12
- Installing the card stacker 13
- (to the next page) 15
- Wind the film by 16
- Media Search 17
- Before use 21
- * Firmware version 22
- * Displays Free/Head or 22
- Total, according to the 22
- * Print counter 22
- Operation 23
- LCD indicator displays: 24
- By depressing the 24
- Operation (continued) 25
- User mode settings 26
- Clearing the free counter 28
- Cleaning mode 28
- Retransfer mode setting 30
- Setting the bend remedy mode 32
- Care and cleaning 34
- Cleaning (continued) 35
- HR is too hot! 37
- Cleaning the magnetic head 38
- Troubleshooting 39
- Error code listing 40
- Troubleshooting (continued) 41
- Mending broken ink ribbon and 42
- About printing errors 42
- Jog lever 44
- Specifications 45
- Front view 46
- Side view 46
- KAT-T161-001 48
- 0312(VP) 48
Relacionado con productos y manuales para Impresión y escaneo Victor Data Systems XID
(48 paginas)
(6 paginas)Sony ICF-CD820L manuali
Manuali dei proprietari e guide per l'utente per Orologio Sony ICF-CD820L.
We fornisce 1 manuali pdf Sony ICF-CD820L per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Comentarios a estos manuales